Introducing a more sustainable, water and chemical repellent fabric
DuPont™ Nomex® Comfort with EcoForce™ Technology is designed specifically for workers in the chemical and pharma industries, as well as research & lab environments— offering FR protection in accordance with NFPA 2112. In addition, it offers limited protection against small quantities and splashes of targeted liquid chemicals.
Made with a finish that repels both water and chemicals, comprised of more than 50% bio-based materials and not made with PFAS, Nomex® Comfort with EcoForce™ Technology offers superior, sustainable performance that’s designed to last.
Durable, comfortable and sustainable by design
Made using a finish* that repels water and chemicals, comprised of +50% bio-based materials and not made with PFAS
Certified after 100x industrial cleaning cycles (ISO 15797) without reapplying the repellent finish**
Superior heat and flame resistance that workers need
*No irritation was observed with Nomex® Comfort with EcoForce™ Technology fabric in skin patch test
** According to ISO 15797 industrial laundering requirements, the fabric continues to maintain its performance in accordance with the initial requirements of EN 13034, EN ISO 11612 and EN 1149-5. Significant wash durability of Nomex® Comfort with EcoForce™ Technology fabric can reduce the need for reimpregnation when compared with existing solutions.
^Do not continue to use a garment that is contaminated with flammable liquids.
Meets AATCC testing
A modified AATCC 193 test was performed on Nomex® Comfort with EcoForce™ Technology fabrics to assess splash resistance.
An "A" rating signifies no interaction with the fabric and a "D" rating signifies complete wetting of the chemical to the fabric. Nomex® Comfort with EcoForce™ Technology received an “A” rating.
Results
Fig 1 – Grading example
Other chemicals tested upon request
A = Passes; clear well-rounded drop
B = Borderline pass; rounding drop with partial darkening
C = Fails; wicking apparent and/or complete wetting
D = Fails; complete wetting
In addition, Nomex® Comfort with EcoForce™ technology helps provide resistance to penetration from chemical splashes with corrosive liquids as well as strong oxidizers, including piranha solution –a mixture of sulfuric acid and hydrogen peroxide– that is used to clean laboratory glassware.
Fig 2 – Left: Piranha solution absorbed into untreated fabric; Right: Piranha solution suspended on Nomex® Comfort with EcoForce™ treatment.
Meets or exceeds international standards
ISO 11612
EN 1149-5
EN 13034*
EN & IEC 61482-2 <br> (ELIM/APC/ATPV)
STANDARD 100
NFPA 2112
ASTM 1506
*Including ISO 16602 Type 6
OEKO-TEX® is a registered trademark of OEKO-TEX®Service GmbH
Nomex® Comfort with EcoForce™ Technology data sheet
Innovative protection for extreme industries
Chemical
Lab
Pharma
The performance only Nomex® can provide
Better protection at longer exposures and higher temperatures
Inherent FR protection that cannot be washed out or worn away
Resists tears and abrasion
Helps provide valuable escape time
Lasts longer than other protective fabrics
Provides exceptional comfort***
*According to ISO 15797 industrial laundering requirements, the fabric continues to maintain its performance in accordance with the initial requirements of AATCC 193, EN ISO 11612 and EN 1149-5
**Significant wash durability of Nomex® Comfort with EcoForce™ Technology fabric can reduce the need for reimpregnation when compared with existing solutions
***No irritation observed with Nomex® Comfort with EcoForce™ Technology fabric in skin patch test
Sustainability & performance
We’re committed to delivering superior protection while creating a more sustainable future for everyone. Contact us to find out more on high-performing sustainable products.
